Choose by fire class
An electrical fire, a cooking oil fire and a paper fire: pick the right extinguisher for each.
Choose the right extinguisher for the fire in front of you, use it properly and know when to walk away. No mess, no refills, no smoke in the car park.

Virtual fire extinguisher training lets staff tackle simulated fires in their own workplace. In mixed reality they hold a real extinguisher body fitted with a tracked nozzle and see the fire in the actual room; in VR a tracked controller stands in. They choose the right type for the fire class, use the correct technique and learn when a fire is too big to fight.
Live extinguisher training needs a fire ground, gas, refills and good weather, so most staff only see a demonstration. Few ever choose an extinguisher under pressure.
Simulation puts the choice in front of them: an electrical fire, a cooking oil fire, a fire that's already too big. Each one has a right answer, and the wrong one shows what happens.
Examples only. We rebuild each one around your site, equipment and procedures.
An electrical fire, a cooking oil fire and a paper fire: pick the right extinguisher for each.
Pull the pin, aim at the base, squeeze and sweep, from a safe distance.
The fire spreads past the point of safe attack. Raise the alarm and get out.
Every session can be scored against your own checklist and exported to your LMS or as PDF.
Extinguisher types and fire classes follow Australian practice, including Class E electrical and Class F cooking oil fires, and the selection and location guidance in AS 2444.
The same fire extinguisher training scenarios can run on different hardware. We recommend a format in scoping, and many projects use more than one. Each links to the service that builds it.
A real extinguisher body with a tracked nozzle, and a virtual fire in your actual room.
Passthrough headset · Real equipmentMixed reality (XR) training VR headsetWorks wellFully immersive fires in your kitchen, workshop or store.
Standalone headset · Works offlineVR training apps Web & mobile 3DAlso possibleFire classes and extinguisher choice as a short quiz.
Any browser · SCORM / xAPIDesktop & web 3D
Alarms by zone, isolations, faults and resets on a virtual copy of your panel.
See the example
Evacuations with a blocked stair, people who need help and the headcount.
See the example
Permits, area preparation, sparks through gaps and the fire after the job.
See the exampleA first call about what your people face, then an outline of the scenarios, the format and the scoring we would build.
Start a projectVirtual fire extinguisher training lets staff tackle simulated fires in their own workplace. In mixed reality they hold a real extinguisher body fitted with a tracked nozzle and see the fire in the actual room; in VR a tracked controller stands in. They choose the right type for the fire class, use the correct technique and learn when a fire is too big to fight.
It covers choice, technique and judgement for everyone. Some sites still add a live discharge for wardens; simulation means everyone else gets meaningful practice too.
Yes. We place the fires and extinguishers where they are in your building.
We usually design it as a 10 to 20 minute module, so whole teams can rotate through in a session.